Code Alarm HQ7415 Instrukcja Użytkownika Pobierz pdf

Model CATX510

Programming Guide

The keychain transmitters included with the system have been pre-

programmed at the factory, with each button pre-assigned to control a specific

function of the system.

The system will store codes from up to 4 different transmitters. If a 5

transmitter is programmed to the system, then the first transmitter

programmed to the system will be erased from the system’s memory.

To program new or additional transmitters:

1. Enter the vehicle, and turn the ignition switch to the ON position.

2. Press and release the programming button switch 3 times.

3. The dash mounted LED will flash 1 time, and the parking lights will flash 1

time, indicating that the system is ready to accept programming of channel 1

which is LOCK.

4. Press and hold the lock icon button of the transmitter you wish to program

for 4 seconds or until a long flash from the parking lights.

4a. Repeat step 4 for any additional transmitter you wish to program.

5. Press and release the programming button switch 1 time to advance to

channel 2. The parking lights will flash 2 times and the dash mounted LED will

flash 2 times, indicating that the system is ready to accept programming for

channel 2 which is UNLOCK.

6. Press and hold the unlock icon button of the transmitter you wish to

program for 4 seconds or until a long flash from the parking lights.

6a. Repeat step 6 for any additional transmitter you wish to program.

7. Press and release the programming button switch 1 time to advance to

channel 3. The parking lights will flash 3 times and the dash mounted LED will

flash 3 times, indicating that the system is ready to accept programming for

channel 3 which is REMOTE START.

8. Press and hold both buttons simultaneously of the transmitter you wish to

program for 4 seconds or until a long flash from the parking lights.

8a. Repeat step 8 for any additional transmitter you wish to program.

1 2

Model CATX510 1

Podsumowanie treści

Strona 1 - Model CATX510

Model CATX510Programming GuideThe keychain transmitters included with the system have been pre-programmed at the factory, with each button pre-assigne

Strona 2

Changing the Remote Control BatteryThe 12-volt alkaline battery supplied in your remotetransmitter should last approximately one year, depending onusa

Komentarze do niniejszej Instrukcji

Brak uwag

Code Alarm HQ7415 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Zdalne sterowanie Code Alarm HQ7415. Code Alarm HQ7415 User's Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Zdalne sterowanie Code Alarm HQ7415